Firmware
To update the firmware download and extract the firmware zip. Plug Cluster Commander to USB and execute "RunMe.bat" A window will pop up listing all your detected COM ports and ask which one the cluster commander is connected to. If you're not sure, close the window and look at Windows Device Manager and unplug / replug the cluster commander to determine it's COM port. If you do know which COM port to use, just type in the number of the port and hit enter. Flashing will commence immediately. Strongly advised to (L)oad default values and (W)rite to the EEPROM after flashing.
NB
| Version |
Release Date |
Release Notes |
| 1.01 |
12/1/2017 |
- Fixed overflow that might cause the Tach to stop working after 70 minutes.
- Smoothed Coolant gauge reaction to voltage fluctuations.
|
| 1.00 |
6/1/2017 |
|
NC
| Version |
Release Date |
Release Notes |
| 1.01 |
2/16/2018 |
- Added 06-09 E38 ECM Support
- Improved VIN request
- Improved Odometer Accuracy
- Added Tach Scaling
|
| 1.00 |
6/1/2017 |
|
RX8
| Version |
Release Date |
Release Notes |
| 1.01 |
2/16/2018 |
- Added 06-09 E38 ECM Support
- Improved VIN request
- Improved Odometer Accuracy
- Added Tach Scaling
- Added User-Settable Shift Buzzer
- Repurposed Low Oil Reservoir light for Low Oil Pressure
- Repurposed Low Coolant light for Very High Coolant Temperature
|
| 1.00 |
6/1/2017 |
|